Marble look epoxy resin for home garage floor coating and decorated metal floors

Product Definition

Veropoxy is a premium two-component epoxy resin adhesive brand manufacturer whose products are specially formulated for marble slabs to provide unparalleled protection and enhancement to the natural stone. This epoxy adhesive provides a strong protective layer, significantly improving the abrasion and chemical resistance of marble, while highlighting the original veining and color of the marble through its superior clarity and gloss. The epoxy is easy to apply and fix to smooth surfaces, not only enhancing the beauty of marble, but also significantly improving its durability. Ideal for interior design and furniture manufacturing, Veropoxy will give marble slabs a modern and lasting appeal. Choose Veropoxy for professional-grade epoxy protection and beauty for your marble slab project.

Product Features ：

Product attributes

Origin: China

Main raw material: epoxy resin

Application: construction

Name: epoxy adhesive

Classification: two-component adhesive

Brand: Veropoxy

Adhesive type: resin epoxy resin

Application: rough surface coating and sealing

The application steps of epoxy resin in stone processing are as follows:

First, place the large board on the glue repair trolley or glue repair line, and ensure that the surface to be sanded is facing up. For large boards with severe cracks, repairs are required and reinforcement may be used with steel bars, aluminum bars or plastic bars. Next, clean the surface to be sanded and ensure that it is dry and dust-free to remove any substances that may affect the adhesion of epoxy resin.

Then, choose a suitable fiber mesh according to the area of ​​the large board. The size of the fiber mesh should be 60mm smaller than the length and width of the large board. When mixing epoxy resin glue, mix according to the proportion of A and B components on the instructions, and use a mixer to ensure uniform mixing. Scrape the prepared epoxy resin glue evenly on the surface of the stone and the fiber mesh, ensuring that the colloid completely covers the mesh.

Then, evenly sprinkle the marble sand that meets the requirements on the surface of the epoxy resin glue. The large board after sanding needs to be cured by natural drying or drying. After the epoxy resin glue on the sanding surface is completely dry, the board is collected to prevent sand particles from falling off and offset printing.

Add a plastic film between the sanding surface and the front of the slab to prevent the sand from rubbing against the front of the stone. Pack or stack the sanded slabs in turns. Finally, cut the sanded slabs that need to be processed, and use spacers to protect the front of the product from being scratched by sand.

These steps describe the use of epoxy resin in stone processing in detail, from preparation to final processing, ensuring that epoxy resin can be effectively used for stone repair and enhancement.

Usage Instructions:

Clean the surface of the Marble to ensure it is dust and oil-free.

Mix the epoxy resin and hardener in the ratio specified in the instructions.

Use a specialized tool to inject the mixed epoxy resin into the cracks and pores of the Marble.

Allow the epoxy resin to cure completely, which usually takes 24 hours.

After curing, if necessary, sand and clean the surface.

Precautions:

Use this product in a well-ventilated area.

Keep out of reach of children and pets.

Read the product manual carefully before use.

Packaging Specifications:

1 kg container

5 kg container

Shelf Life:

12 months when unopened.

Storage Conditions:

Store in a cool, dry, and well-ventilated area, away from fire and high temperatures.

With this introduction, you can fully understand the product features and usage methods of the Epoxy Resin Sealant for Marble. We are committed to providing high-quality products to meet your needs for the maintenance and repair of Marble.